PRODUCT DESCRIPTION

The Adjust-A-Grate Model SK10 is designed as a security kit to deter outside entry by locking the window well grate in place. The quick-release feature enables quick and easy egress in case of an emergency. This Security Kit is designed to work inside window well openings that project from the house 37-40 in., typical with the Adjust-A-Grate 10-Loop models. This security kit is designed with a tension bar that is installed between the foundation wall (below the window & window frame) and the opposite wall (your window well). This can be used with metal, concrete, or wood wells as long as the dimensions fall within the given range for this model.

Please note: this security kit has been engineered to specifically attach to Adjust-A-Grates, however, we have heard from many customers who have successfully modified the way the security kit attaches to different styles of grates with a few minor additional purchases from the hardware store.

Expanded Metal Grates: Remove the top clip and discard it but keep the bolts. Purchase 2 fender washers and run the bolts through the fender washers through the holes on your grate and into the bottom clip of the security kit. You may want to take the bolts with you when you purchase the fender washers so that you can ensure they will fit through the hole in the washer. It is best to try to keep the cable of the security kit as close to the center of your grate as possible.

Bar Grates: The other option is to purchase a ¼” x 1” x 1 ¾” U Bolt and replace the top clip and the bolts included in the security kit with the U Bolt. The last dimension on the U Bolt is for the height so one a little longer could be necessary depending on the thickness of the bars in your particular grate. Again you would want to position the security kit as close to the center of your grate as possible.

Manufactured in the USA by family-owned and operated, Adjust-A-Grate, Inc.